VANGUARD
V5 Hybrid Fire Alarm Panel

• Compatibility: Works with many other make of equipment, panels and devices
• Flexibility: Wide range of auxiliary panels to meet each requirement, e.g.: Fire Extinguishing, Smoke Control, Pre-action etc.
• Alarm interlocks: General sounder silencing and system resetting for system with multiple panels.
• Ease of use: Simple on touch operation - easy to learn and reduces errors.
• Diagnostic facilities: Informative diagnostic LED indicators for easy identification and rectification of faults.
• Reliability: System designed with proven solid state detection technology.
• Compliance: BS EN 54 Parts 2 & 4: 1998 and SS CP-10:2005.
• Approval: PSB Listed (4 to 136 zones).

VANGUARD
V5 Advance Fire Extinguishing Panel

• Flexibility: Wide range of auxiliary functions to meet each requirement e.g. AHU shut down, exhaust fan activation, equipment function remote status monitoring etc..
• Alarm interlocks: General sounder silencing and system resetting for system with multiple zone panel.
• Ease of use: Simple on touch operation - easy to learn and reduces errors.
• Diagnostic facilities: Informative diagnostic LED indicators for easy identification and rectification of faults.
• Facilities: Two digits timer countdown display, remote/local manual release & abort functions, 1st & 2nd alarm auxiliary output etc.
• Reliability: System designed with proven solid state detection technology.
• Compliance: BS EN 54 Parts 2 & 4: 1998 and SS CP-10:2005.
• Approval: PSB Listed (1 to 136 zones).

Back to top

SENTEK Conventional Heat Detector
Model: HD-912

• Combined ROR/FT Heat Detector.
• Advanced detection and discrimination algorithms.
• Flashing LED indicating of power status.
• Available in 2 or 4 wires type.
• Operating Voltage: 24VDC.
• Standby Current: 45µA.
• Alarm Current: 50mA @24VDC
• Thermal Setting: 57°C
• Operating Temperature: -10°C to +50°C
• Humidity: 0 to 95% RH, no condensation or icing.
• UL Listed.

SENTEK Conventional Smoke Detector
Model: SD-119

• Photoelectric Smoke Detector.
• Advanced detection and discrimination algorithms.
• Flashing LED indicating of power status.
• Available in 2 or 4 wires type.
• Operating Voltage: 24VDC.
• Standby Current: 80µA.
• Alarm Current: 55mA @24VDC.
• Operating Temperature: -10°C to +50°C.
• Humidity: 0 to 95% RH, no condensation or icing.
• UL Listed.

EN14604

SENTEK Standalone Smoke Detector
Model: SD218

• Photoelectric sensing technology.
• Low-sensitivity warning.
• Low-battery warning.
• Test button.
• Loud alarm sound at 85db/3m.
• Ambient Temperature: 0°C to 50°C.
• Humidity: 0 to 95% RH, no condensation or icing.
• Battery operated: 9VDC
• Standby Current: 8µA.
• Alarm Current: 15mA.
• Long lasting Lithium battery model available on MOQ request.

Best Seller for Home Protection

SENTEK Standalone Smoke Detector
Model: SK-20

• Photoelectric sensing technology.
• Big Test / Silence button for easy user interaction.
• 10 years Lithium battery.
• Low-battery warning.
• Loud alarm sound at 85db/3m.
• Ambient Temperature: 0°C to 45°C.
• Humidity: 93% RH.
• Battery operated: 9VDC
• Quiescent Current: 3µA.
• Complaint with EN14604:2005.
• LPCB Approved.
• Ideal for home protection as no need any cabling works.

SITERWELL Wireless Interconnection Smoke Alarm
Model: GS511E

• Wireless Smoke Alarm.
• Interconnection function, up to 64 pcs.
• Built-in 3VDC(CR17450) 10 years Lithium battery.
• Low-battery warning and fault indication.
• Loud 85db alarm sound at 3m.
• Ambient Temperature: 0°C to 40°C.
• Humidity: 93% RH.
• Quiescent Current: 11µA.
• Complaint with EN14604:2005.
• Activfire certified to AS3786:2014.
• DIY - no cabling works.Users never need to change battery.

SITERWELL AC 240V/50Hz with DC 9V battery back up smoke alarm with wireless connection base.
Model: GS519

• Loud > 85db(A) alarm signal at 3m.
• Low battery signal alarm; Fault warning.
• Photoelectric Smoke Chamber.
• Wrieless interconnect up to 40 pcs.
• Flash Alarm Indicator (Red).
• Test button for easy recommended monthly testing
• Safety clip feature, not allowed moutning of smoke alarm without battery installed.
• Silence function, silence time: 10 minutes.
• Standby indicator: Red LED flashes every 40 seconds.

Back to top

Installation Manual
Click Here

SyCALL® Conventional Resettable Manual Call Point
Model: R6847L

• Resettable type.
• Very high visibility of alarm condition with LED lights on front and side.
• Visible in the dark.
• New efficient and reliable mecahnism.
• Made of high Resistant material.
• Design fully comply with EN54-11.
• LPCB Approved Type.
• Clear Safety Cover available separately.

Installation Manual
Click Here

HORING LIH Conventional Manual Call Point
Model: AH-0217

• Flush or Surface Mount..
• Plastic film on glass - prevents cuts on hand.
• Test key insert from bottom..
• Suitable for use in majority conventional fire alarm system..
• LPCB Approved Type.
• Clear Safety Cover available separately.

Installation Manual
Click Here

HORING LIH 6" Fire Alarm Bell
Model: AH-0218

• High efficiency, low current consumption.
• 93 dB / M & above.
  
• Fitted with two series diodes for fault monitoring.
• Fully suppressed and no interference with other equipment.
• Dimension: Ø6" (152mm) x 56mm(H)
• Weight: 850g
• LPCB Approved Type.

Installation Manual
Click Here

HONG CHANG 6" Fire Alarm Bell
Model: HL-624

• High efficiency, low current consumption.
• 93 dB / M & above.
  
• Fitted with two series diodes for fault monitoring.
• Fully suppressed and no interference with other equipment.
• Dimension: Ø6" (152mm) x 56mm(H).
• Weight: 850g.
• UL Approved Type.

HORING LIH 4" Fire Alarm Bell
Model: AH-9718

• Low current consumption (28mA).
• 90 dB / M & above.
• Bell shell is made of steel plate.
• Dimension: Ø4" (100mm) x 50mm(H).
• Weight: 450g.

Installation Manual
Click Here

HONG CHANG Alarm Bell Back Box
Model: HL-BB

• Outdoor Back Box for HL-624 Fire Alarm Bell.
• Rubber Gasket included.
• Conduit Fitting: NPT 1/2".

Installation Manual
Click Here

HORING LIH Electronic Sounder Model: AH-03127-S/BS

• High sound output with low current consumption.
• Max. 114 dB.
  
• 32 signal tones selectable by Dip switch.
• Two sets of IN and OUT terminals, easy for installation.
• Beacon model available (BS).
• Dimension: Ø92.5mm x 94mm / Ø92.5mm x 110mm
• Weight: 254g / 278g.
• LPCB Approved Type.

SyCALL® Wall Mount VAD Beacon White LED
Model: WBW99 / WBW98

• EN54.23 with sychro compliant.
  
• Voltage: 9Vdc to 60Vdc..
• Alarm Current: 14.5mA (High Converate).
• Both Internal and Weatherproof model.
• WBW99 Dimension (HxWxL): 45 x 109 x 121 mm
• WBW98 Dimension (HxWxL): 63 x 118 x 121 mm

HORING LIH Remote LED Indicator
Model: AH-01313

• Used with 3 or 4 wire type detectors for remote area.
• Low current consumption.
  
• Parallel type wiring.
• Alarm Current: 12mA (24VDC).
• Fire proof plastic, White surface / Red LED.
• Dimension: 70mm(H) x 70mm(W) x 15mm(D).

Electromagnetic Door Holder
Model: DH1224

• Voltage Input : 12 VDC / 24 VDC
• Current Draw : 12V / 100mA ; 24V / 50mA
• Holding Force : Up to 150 lbs (70 kg)
• Dimensions:
  Magnet - 85(L) x 70(W) x 40(D) mm
  Armature - Ф55 x 8(D) mm
• Weight : 0.7 kg (±1%)

Demo Video
Click Here

Integrated 2-IN-1 Smoke Temperature Tester
Model: ABS-YW10

• Applicable for testing of heat & smoke detectors

Smoke Detector Tester Spray
Model: AH-03128S

• Easy to use, simply spray on detector.
• Safest way of testing Smoke Detector.
• Disposable after use.

HORING LIH Detector Test Device
Model: AH-03128

• Applicable for testing of heat & smoke detectors
  
• Extension pole included, expanding from 1.44M to 5M length.
• Pivoted test vessel, for easy to reach detector during testing.
• Heat detector testing is via gas igniter that generate heat (not naked flame).
  
• Smoke detector testing via smoke tester that fits nicely inside the test vessel.

Back to top